JANSEN BSF-13 STUMP GRINDER
(Scotland & Ireland will incure an additional This stump grinder is very mobile as its width measures a mere 750 mm. With this narrow width, it fits through almost every doorway. The 12 extra hardened Wolfram-carbide grinding blades are extremely durable and can be replaced individually.
shipping surcharge, for a
complete shipping cost to these locations please
STOCK UNITS ARE HELD AT OUR YARD IN CRATE FORM, AS A RESULT ASSEMBLY AND DESPATCH ON THESE UNITS IS 1-2 WEEKS FROM DATE OF ORDER. PLEASE BEAR THIS IN MIND WHEN ORDERING.
This was tested by Jansen over a period of 100 hours and they didn’t have to replace any of the blades after this operating time; even the drive belt remained technically and operationally sound.
The device has 4 practical bearing rods; this means that you do not need a ramp in order to load the stump grinder.
The cutting area is dependent on the approach angle between tree stump and machine and a cutting depth of 300mm into the ground is possible.
The grinding width is 55 mm. The grinder has a safety switch (dead man's switch) as well as a braking system. In this way the device can be fixed at the tree root while grinding, and can be moved back and forth using the pivot.
The 15 HP LONCIN G420F engine can be started easily using the recoil starter and has an automatic low oil cut-off system. Performance has been optimally geared toward the size and cutting assembly of the root grinder.
- 4-stroke OHV engine, 420 ccm, 15 HP LONCIN G420F
- Centrifugal clutch
- Recoil starter
- Rotation speed: 2100 rpm
- Total weight (dry): 100 kg
- Fuel type: petrol
- Tank capacity: 6 litres
- Fuel consumption: Approx. 1.2 – 1.5 L/h
- Dimensions: 152x75x112 cm (LxWxH)
Please note that all Jansen equipment is sold subject to these conditions in addition to our standard T&C's.