Out of Stock

Contact us for a price



(Scotland & Ireland will incure an additional
shipping surcharge, for a
complete shipping cost to these locations please
contact us)

Current delivery and despatch times are running at around 2 weeks,
please bear this in mind when ordering.

The crawler dumper / chain dumper Jansen RD-200 has a 9 HP petrol engine, which is started by a pull starter. It is self-propelled and the body can be tilted.

The tipping angle of the trough goes beyond 90 °, which makes emptying so much easier!

For this purpose, a hydraulic unit and a hydraulic cylinder have been installed on the machine. With this function, our mini dumper sets itself apart from the competition! The lifting and lowering process takes place within a few seconds. The trough has a size of 1000x670x445 mm.

There are many competitive offers with very similar looking machines. Compare these offers in detail with our RD-200. We deliver a reinforced version of the machine with an also reinforced trough (wall thickness 3 mm). In contrast to many other offers, with our RD-200 the trough on the discharge is straight and not conical - this makes it very easy to dump the bulk material. With tapered troughs, the bulk material wedges very quickly when dumped.

With its chain drive, this dumper is suitable for particularly rough terrain. Even slopes can be mastered effortlessly.

You can load up to 500 kg; here is an overview of the payload and performance:
  • flat terrain: payload up to 500 kg
  • approx. 17% or 10 degree gradient: up to 450 kg
  • approx. 30% or 17 degree gradient: up to 375 kg
The engine has a very good starting behavior (even at low temperatures) and can be started with a pull starter.

The crawler dumper has 3 forward gears and 1 reverse gear. The maximum speed is approx. 6 km / h. It is ideally suited for the transport of sand, earth, gravel, stones etc.

Technical specifications:

  • 4-stroke engine OHV, 9 HP, Loncin
  • Starter: pull starter
  • Speed: max. 6 km / h
  • Tank capacity: 3.6 liters
  • Payload: max. 500 kg, with a 30% incline approx. 375 kg
  • Total weight (dry): 290 kg
  • Weight with packaging: approx. 325 kg
  • Regular gasoline
  • Dimensions: 1850x750x1110 mm (LxWxH, trough above)
  • Dimensions loading tray: 1000x670x445 mm
  • Ground clearance: 110 mm front, 90 mm rear
  • Height of front edge of loading trough: 55 cm from the floor
  • Dimensions packaging: 1700x800x1150 mm
  • Trough drive: hydraulic

    Please note that all Jansen equipment is sold subject to these conditions in addition to our standard T&C's.