JANSEN EFGC-175 FLAIL MOWER WITH 1.7M CUTTING WIDTH
(Scotland & Ireland will incure an additional
shipping surcharge, for a
complete shipping cost to these locations please
Current delivery and despatch times are running at around 2 weeks,
please bear this in mind when ordering.
The mulching mower EFGC-175 is characterized by its particularly robust construction. It has a specially reinforced bevel gear and can be used excellently as a mulching mower, tractor mower, etc.
The tractor mower has a mowing width of 172 cm and is driven via the PTO shaft included in the scope of delivery.
This mulcher has the heaviest gear in its class. In contrast to the mowers equipped with light Y-blades, this mower has the best performance thanks to the high centrifugal mass which results from the heavy hammer blades and the heavier shaft. The 28 specially hardened, 0.8 kg hammer knives shred the clippings to a minimum. Even very tall grass, bushy or straw clippings are no problem with this mower!
With its even rotor load, the double spiral rotor ensures particularly smooth running and long durability with much less effort. Even very tall grass, bushy or straw clippings are no problem with this mower!
In addition, the mulcher is equipped with a very heavy trailing roller and a freewheel gear. The cutting height can be adjusted via the top link and the runners on the side. Pendulum-suspended, galvanized lamellas on the front of the mower deck prevent stones from escaping, etc.
The flip-up maintenance flap allows access to the flail shaft, which makes changing the hammer flail and any maintenance work even easier. We would like to point out that the maintenance flap must be closed when mowing, in order to prevent stones, etc. from escaping.
The mower is hung in the three-point hitch of your tractor (from Cat. I upwards). Your tractor should have at least 30 HP.