STUBBINGS BROS LTD

JANSEN AGF-240 VERGE FLAIL MOWER

Out of Stock

Contact us for a price


JANSEN AGF-240 VERGE FLAIL MOWER

INCLUDES
FREE SHIPPING!

(Scotland & Ireland will incure an additional
shipping surcharge, for a
complete shipping cost to these locations please
contact us)
The especially robust construction of the AGF-240 verge mulching mower makes it stand out. In contrast to the lighter models "AGL" this is the heaviest mowing unit model (higher material strength etc.) we are dealing with. Heavier 1.2 kg hammers are also installed in this mowing unit, not the otherwise standard 800 g hammers. The Jansen AGF-240 has a specially strengthened angular gearbox. Through lateral alignment of the mowing unit you can mow ditches, bank areas, earth walls, etc., with ease.


This model has a mowing width of 239 cm and is driven using a P.T.O, included as part of the delivery. It can be moved to the left and right and you can set it at an angle (90° upward and 55° downward). For this function you need 2 hydraulic control circuits on your tractor, as the mower unit has 2 double-action hydraulic cylinders for this purpose.

The 24 specially hardened, 1.2 kg hammer blades, which are arranged on a double spiral drive shaft, shred clippings to a minimum size. Even very high grass, bushy or straw-like clippings are no problem for this mower!




Due to the open rear bonnet maintenance work or changing hammer blades will be facilitated. Please be informed that the bonnet has to be closed while operating.

With maximum lateral alignment the dimension from the middle of the tractor to the outer edge of the mowing unit is approx. 329 cm. Please find more dimensions in the following drawings:





Furthermore, the Jansen AGF-240 comes with collision protection. This is triggered in the event of contact with hindrances, for example fencepost etc., and allows the verge mulching mower unit to swing upward, site and backward in order to minimise the risk of greater damage.

The cutting height can be set with the top controller and the runners mounted on the side. The AGF-240 mulching mower additionally has a trailing roller and a freewheel gearbox. The suspended chains at the front of the mower unit prevent stones escaping.

The mower unit is hung using the three point linkage of your tractor (from Cat. II). Your tractor should have at least 90 HP.


Technical specifications:

  • Mowing width: 2390 mm
  • Weight: 955 kg
  • Weight including packing: 990 kg
  • Tilt movement range: +90° to -55°
  • Cutting blade type: 1.2 kg hammer blades
  • P.T.O: Included in delivery
  • Rpm: 540
  • drive shaft Ø: 160 mm
  • trailing roller Ø: 160 mm
  • Packaging measurements: 3080x1080x920 mm (LxWxH)
  • Wall thickness: 6 - 16 mm (depending on location on the mower)
  • Drive: 5 Piece drive belt
  • Mounting: Three point hitch from Cat. II
  • Tractor: min. 90 HP


Please note that all Jansen equipment is sold subject to these conditions in addition to our standard T&C's.





SKU:.NAGF-240
...