Out of Stock

Contact us for a price



(Scotland & Ireland will incure an additional
shipping surcharge, for a
complete shipping cost to these locations please
contact us)
The Jansen AG-220 flail mower with hydraulic side shift is suitable for front and rear mounting. It is characterized by its particularly robust construction. It has a specially reinforced bevel gear and can be used excellently as a mulching mower, tractor mower, etc.

The tractor mower has a mowing width of 217 cm and is driven via the PTO shaft included in the scope of delivery.

With the help of the hydraulic side shift , the mulcher can be moved left and right. For this function you need a hydraulic control circuit on your tractor / tractor, because the mower is equipped with a double-acting hydraulic cylinder.

This mower can be mounted on both sides and can therefore be hung on the front and rear three-point linkage of your tractor (from Cat. II, with slight adjustment also Cat. I). Compared to many competitor models with 540 rpm. Working geared, you have a stable 1,000 rpm with our model. Transmission. This is mandatory for operation on a front PTO!

This mower has the heaviest gear in its class. In contrast to the mowers equipped with light Y-blades, this mower has the best performance thanks to the high centrifugal mass which results from the heavy hammer blades and the heavier shaft. The 20 specially hardened, 1.2 kg hammer knives shred the clippings to a minimum.

With its even rotor load, the double spiral rotor ensures particularly smooth running and long durability with much less effort. Even very tall grass, bushy or straw clippings are no problem with this mower!

In addition, the mulcher is equipped with a very heavy trailing roller and a freewheel gear.

The cutting height can be adjusted using the runners on the side. Pendulum-suspended, galvanized lamellas on the front of the mower deck prevent stones from escaping, etc.

The mower deck is hung in the three-point linkage of your tractor (from Cat. I upwards). Your tractor should have at least 55 hp.

Technical specifications:

  • Mowing width: 2170 mm
  • Hydraulic Side-Shift
  • Blades: 20 piece, 1,2 kg
  • Weight: 736 kg
  • P.T.O: included in delivery
  • Drive belt: 4 pieces
  • Packaging: Wooden crate
  • drive shaft Ø: 120 mm
  • trailing roller Ø: 145 mm
  • Dimensions of packaging: 2450x850x900 mm (LxWxH)
  • Rpm: 1.000 (front & rear)
  • Wall thickness: 8-12 mm (internal sheets 5 mm)
  • Mounting: Three point hitch of Cat. I
  • Tractor: min. 55 HP

Please note that all Jansen equipment is sold subject to these conditions in addition to our standard T&C's.