FS70CE PETROL BRUSHCUTTER
For mowing large areas of tough grass
Extremely robust 0.9 kW petrol brushcutter with bike handle. 2-MIX engine consumes up to 20% less fuel and 70% less emissions compared to conventional two-stroke engines without 2-MIX technology. ErgoStart simplified starting procedure for increased comfort. Optimised trimmer angle for working on large areas of tough grass.
Reduced-emission engine technology
2-stroke engine with stratified charge. A fuel-free layer of air is created between the burned charge in the combustion chamber and the fresh charge in the crankcase, reducing the amount of fuel lost during the charge cycle. This results in more power with a lower weight, up to 20% lower fuel consumption than regular 2-stroke engines and significantly reduced exhaust emissions.
Manual fuel pump (Purger)
A small fuel pump delivers fuel to the carburettor at the touch of a button. This reduces the number of starting strokes required following extended breaks in operations.
STIHL ErgoStart (E)
STIHL ErgoStart cuts the effort required to start the tool by half, while the starter cord can be pulled at just one third of the normal force. A coil spring between the starter cord and the crankshaft smoothes out force peaks, making them virtually undetectable through the cord itself.
Simplified starting system
Simply set the choke, pump the fuel primer, pull the starter cord and away you go! The running machine then switches off after a brief press of the stop button. Once the machine is at a standstill, the ignition activates again automatically. Thus the ignition is always ready for starting.
When used in conjunction with a harness, the bike handle enables a smooth mowing action. The bike handle allows the machine to be easily guided, making it ideal for working on large areas and thus reducing fatigue.
Multi-function control handle
Easy, comfortable thumb-operated control means the operator's hand never leaves the handle.
Displacement cm3 27.2
Performance kW 0.9
Power output hp 1.2
CO² g/kWh 829
Weight kg 1) 5.4
Sound pressure level with plastic tool dB(A) 2) 94
Sound power level dB(A) 2) 108
Vibration value, left with plastic tool m/s2 3) 7
Vibration value, right with plastic tool m/s2 3) 5.5
Total length cm 4) 170
Displacement cm³ 27.2
Power output kW/bhp 0.9/1.2
Cutting diameter mm 420
Weight kg 5) 5.4
Tank volume l 0.34
Standard cutting tool AutoCut C 26-2 & GrassCut 230-2
Handle type Mählenker / Schrittbegrenzer
Carburettor Standardvergaser / Spülvorlage / No Touch Limiter Cap
Anti vibration system ohne AV-System
Tank cap STV schraub Tankverschluss
Starter cord ErgoStart
1) Without fuel, cutting tool and without protection
2) K-factor according to DIR 2006/42/EC = 2.5 dB (A)
3) K-factor according to DIR 2006/42/EC = 2m / s ²
4) Without cutting tool
5) without cutting tool and deflector