JANSEN HS-20H110 LOG SPLITTER PETROL

The Jansen HS-20H110 is a log splitter with a special feature. This wood splitting machine can be operated both standing and lying. The machine can be comfortably erected or lowered using an additional hydraulic cylinder. The gap dimension is 110 cm and the gap pressure is 20 tons. The hydraulic pump is driven by a very robust and high quality 6.5 HP Kohler petrol engine.

In the course of our product improvements, this log splitter is constantly being optimized. So the current versions have some serious advantages over the predecessor ... for example, the operation is now directly on the cylinder, which significantly improves accessibility in standing mode. Furthermore, many flexible cables were replaced by permanently installed metal cables, which makes the device look much clearer and more professional. Finally, the wheels are now ball-bearing; this guarantees a much quieter run. On some videos you can still see the old version of the HS-20H110 in which the control levers are still very far behind in the standing mode.

With our log splitters, the gap pressure is measured directly on the splitting ax, so that this information also corresponds to the actual gap pressure. For many other providers, unrealistic values are given here, which are never achieved in practice.

It is similar with the gap dimension specification; we give here the actual, real value of 110 cm, which a piece of wood max. may be long. In the case of many competitors, the gap length has to be subtracted, which is quite misleading. You should also pay attention to the cylinder piston stroke. In our model this is 100 cm, ie the riving knife runs almost completely through the wood; a successful splitting process is certain here! With most available splitters in this size, the cylinder piston stroke is only 50-60 cm, which means that the wedge only runs halfway through the wood and you then often run the risk of cutting the piece to be split with an ax or a Chainsaw must "free" from the splitter again.

This splitter is guaranteed to split every piece of wood and will not surrender to any trunk.

The log splitter is very easy to use. The engine can be started very easily using a cable starter and starts very well even in freezing temperatures.

You can easily transport the device using the existing drawbar and hitch. The device is not approved for road use, ie you must not move it behind a car on public roads. Alternatively, you can of course also drive the log splitter onto a trailer with ramps.



We deliver a splitting cross to the splitter with the mounted splitting wedge free of charge, which is simply pushed over the splitting wedge. A change between wedge and cross is done in seconds!

With the 30 cm long splitting wedge or splitting cross, you can also open thicker logs with larger diameters in one operation. With shorter riving knives, this often does not work and the log often has to be turned through 180 degrees, which is very difficult.

The hydraulic system is designed in such a way that the riving knife can be stopped in any position and moved forwards or backwards. The force is always there and the riving knife does not have to be moved back up to the starting position, as is the case with many competing products.

We have been selling these devices for many years and they have proven themselves with hundreds of customers. This log splitter will not fail on almost any piece of wood; nor could any customer bring us a piece of wood that this log splitter could not split.



The Jansen HS-20H110 is delivered with a high-quality Kohler engine.

Kohler engines
Since 1873, the American manufacturer Kohler has been building innovative engines that are characterized by excellent design and excellent craftsmanship worldwide. In addition to Honda and B&S, Kohler is one of the leading brands when it comes to equipping small motors on garden and landscape equipment and lawnmowers. Leading manufacturers such as John Deere, MTD, Stiga, Toro and many others use these high quality motors. Kohler not only builds gasoline engines - today the innovative Italian diesel engine manufacturer Lombardini also belongs to the Kohler group.

Technical specifications:

• 4-stroke Kohler OHV engine, 6.5 HP, 4.8 kW
• Fuel: regular gasoline
• Tank capacity: 3.6 liters
• Consumption: approx. 1.0 - 1.2 l / h.
• Starter: pull starter
• Weight: approx. 340 kg without liquids
• Train speed: max. 25 km / h
• Max. Gap length: 110 cm
• Cylinder speed for one pass
• down: 12 sec
• up: 11 sec
• Gap pressure: 20 tons (measured value)
• Diameter cylinder: 115 mm, piston rod = 45 mm
• Splitting cross, length: 30 cm (included)
• Splitting wedge, length: 30 cm
• Dimensions: 310x119x122 cm (LxWxH, max. Lying)
• Dimensions: 310x119x270 cm (LxWxH, max. Standing)
• Dimensions: Packaging: 213x53x82 cm (LxWxH)
• Weight including packaging: 372kg
• Engine oil quantity: approx. 1 l (10W40 or. 15W40)
• Hydraulic oil quantity: approx. 20 l (HLP46)
  
  Please note that all Jansen equipment is sold subject to these conditions in addition to our standard T&C's.