 |
|
|
|
|
|
Kubota ride-on tractor mower
Change engine oil and replace filter, change transmission oil and filter, clean transmission strainer. Check engine start system, PTO control system and OPC system. Replace air filter and check air intake line. Replace fuel filters and check fuel lines. Check and clean radiator, hoses and clamps. Check coolant level and concentration. Check and adjust fan belt. Check battery condition. Adjust brakes. Check tyre condition and pressures. Change mower gearbox oil. Level deck. Replace blades/ Sharpen and balance blades. General check over and grease up. Wash off, run and test.
|
|
Ride on/tractor mower (petrol engine up to 14hp and 36" cutting width excluding Kubota)
Drain engine oil from the machine. Replace engine oil filter. Replenish oil to correct level and grade. Clean or replace air filter and pre filter as required. Change Spark plug. Change Fuel filter
Change hydraulic filter *. Carburettor check. Remove and inspect cutter deck. Sharpen and balance cutter blades. Check clutch / brake / transmission. Check drive belts. Check deck / timing belts. Electrics check. Lubricate your machine where required. Run and test. Clean your machine. * where applicable
Large Ride On Mower (petrol engine excluding Kubota)
Work included as above.
|
|
Walk behind mower
Drain engine oil from the machine. Remove, sharpen, balance and refit blade. Replace spark plug. Clean or replace air filter as required. Replenish oil to correct levels and grade. Add fuel fit additive and petrol stabilizer to fuel. Adjust and lubricate drive systems. Adjust and lubricate all cables. Charge and test battery (if fitted) Start machine, run and test. Wash off.
|
Cylinder mower
Full service. Full strip down and check over, set up cylinder & backlap, grind bottom blade if possible, clean out fuel and cooling systems, reassemble, set cylinder, run up and check.
From 14” to 20”
|
Chainsaw
Clean or replace air filter as necessary. Clean or renew fuel filter as necessary. Change spark plug. Check chain brake function. Assess chain and bar condition. Check fuel pump function.Test run the machine and check operation of both the machine and safety system.
|
Strimmers & blowers
Clean or replace air filter as necessary. Clean or renew fuel filter as necessary. Change spark plug. Grease strimmer gear head.Test run the machine and check operation of both the machine and safety system.
|
Check over and appraisal of your machine. Fit new spark plug.
Fit new air filter and clean filter housing. Fit new fuel pick up filter. Grease gear head. Sharpen cutter blades*. Run and test.
Blade sharpen subject to addtional charge depending on size, ask for details.
|
We can collect your mower and deliver back for a fixed charge. Please see our zone map to determine the charge applicable to your location.
Any additional parts needed and any associated fitting charge will be advised on our appraisal of your machine.
If you have any further questions regarding these offers or would like to book your machine in please call Bill in our Service Dept on 01983860005 or send a text /WhatsApp message to 07475551443 and we will call you. Or just send an email to bill@stubbings-bros.co.uk and he will contact you.
|